Disc Magnet 10x3 mm N42 Nickel
0,48 € *
0,48 €*
0,42 €*
Disc magnet 10x3 mm, often used as closure in cabinet making. This magnet must not be covered too thick because holding force is not high enough. If cover is of leather or similar you need larger magnets.
| Coating: | NiCuNi (nickel) |
|---|---|
| Determination of holding force: | Holding force measured on constructional steel (min. 10 mm). Other metallic bonding surfaces or influences (e.g. air humidity, dust, vertical position, outdoor use) might reduce holding force. 1 kg ≈ 10 Newton. |
| Diameter (D): | ~ 10 mm |
| Grade of magnetization: | N42 |
| Handling: | Magnets can break or shatter in an uncontrolled collision. |
| Height (H): | ~ 3 mm |
| Holding force: | ~ 1,8 kg |
| Material: | NdFeB (neodymium) |
| Max. op. temperature: | ~ 80°C |
| Net Weight: | ~ 1,8 g |
| Safety information: | This is not a toy. Inappropriate use might cause injury. |
| Tolerance: | ± 0.1 mm |
Similar Items
-
From 2 piece(s)0,89 €*
-
From 50 piece(s)0,80 €*-10.1 %
-
From 1 piece(s)5,75 €*
-
From 10 piece(s)5,25 €*-8.7 %
-
From 10 piece(s)0,75 €*
-
From 100 piece(s)0,67 €*-10.7 %