Disc Magnet 15x8 mm N42 Nickel
1,89 € *
1,89 €*
1,65 €*
Disc magnet 15x8 mm, one of three classic sizes to build knife blocks.
Magnets should be sunk into bore holes from reverse side and should be covered with wood not thicker than 2 mm. It is helpful to take two magnets per knife to avoid swinging. For more information please regard our information sheet about knife holders.
| Coating: | NiCuNi (nickel) |
|---|---|
| Determination of holding force: | Holding force measured on constructional steel (min. 10 mm). Other metallic bonding surfaces or influences (e.g. air humidity, dust, vertical position, outdoor use) might reduce holding force. 1 kg ≈ 10 Newton. |
| Diameter (D): | ~ 15 mm |
| Grade of magnetization: | N42 |
| Handling: | Magnets can break or shatter in an uncontrolled collision. |
| Height (H): | ~ 8 mm |
| Holding force: | ~ 6,3 kg |
| Material: | NdFeB (neodymium) |
| Max. op. temperature: | ~ 80°C |
| Net Weight: | ~ 10,6 g |
| Safety information: | This is not a toy. Inappropriate use might cause injury. |
| Tolerance: | ± 0.1 mm |
Similar Items
-
From 1 piece(s)1,75 €*
-
From 50 piece(s)1,48 €*-15.4 %
-
From 1 piece(s)2,88 €*
-
From 10 piece(s)2,51 €*-12.8 %
-
From 1 piece(s)3,95 €*
-
From 10 piece(s)3,25 €*-17.7 %