Flat Pot 10 mm A-Type
1,25 € *
1,25 €*
1,10 €*
Flat pot with neodymium magnet.
We offer flat pots in seven different types:
A-type: with counterbore
B-type: with cylindrical bore
C-type: with male thread (screwed end)
D-type: with female thread (screw socket)
E-type: with female thread (screw socket) and open hook
F-type: with female thread (screw socket) and closed loop
G-type: with female thread
| Coating: | zn (zinc) |
|---|---|
| Determination of holding force: | Holding force measured on constructional steel (min. 10 mm). Other metallic bonding surfaces or influences (e.g. air humidity, dust, vertical position, outdoor use) might reduce holding force. 1 kg ≈ 10 Newton. |
| Diameter (D): | ~ 10 mm |
| Diameter countersink (D2): | ~ 7,5 mm |
| Diameter middle hole (D1): | ~ 3,5 mm |
| Grade of magnetization: | N38 |
| Handling: | Magnets can break or shatter in an uncontrolled collision. |
| Height (H): | ~ 4,7 mm |
| Holding force: | ~ 650 g |
| Material: | NdFeB and steel |
| Max. op. temperature: | ~ 80°C |
| Net Weight: | ~ 1,8 g |
| Safety information: | This is not a toy. Inappropriate use might cause injury. |
| Shape: | ring |
| Special Information: | Due to their design, flat pots are unsuitable for use with air gaps., Our flat pots are not only glued by means of a plastic ring, but are poured with epoxy resin. |
| Tolerance: | ± 0.1 mm |
Accessory Items
-
From 5 piece(s)0,44 €*
-
From 100 piece(s)0,40 €*-9.1 %
-
From 5 piece(s)0,25 €*
-
From 100 piece(s)0,22 €*-12 %
-
From 5 piece(s)0,25 €*
-
From 100 piece(s)0,21 €*-16 %
Similar Items
-
From 2 piece(s)0,89 €*
-
From 50 piece(s)0,80 €*-10.1 %
-
From 10 piece(s)0,82 €*
-
From 100 piece(s)0,76 €*-7.3 %
