Ring Magnet 10x3x3 mm N45 Nickel with countersink
0,70 € *
0,70 €*
0,65 €*
Ring magnets are usually magnetised axially (please see technical drawing); if you need a different way of magnetisation in most cases this won't be a standard magnet. Ring magnets with countersink are often used pairwise; then you need one ring magnet with south pole at countersink side, one magnet with north pole at countersink side. Therefore we deliver magnets with countersink in even numbers only.
| Coating: | NiCuNi (nickel) |
|---|---|
| Counterbore: | yes |
| Determination of holding force: | Holding force measured on constructional steel (min. 10 mm). Other metallic bonding surfaces or influences (e.g. air humidity, dust, vertical position, outdoor use) might reduce holding force. 1 kg ≈ 10 Newton. |
| Grade of magnetization: | N45 |
| Handling: | Magnets can break or shatter in an uncontrolled collision. |
| Height (H): | ~ 3 mm |
| Holding force: | ~ 1,5 kg |
| Inner diameter (ID): | ~ 3 mm |
| Material: | NdFeB (neodymium) |
| Max. op. temperature: | ~ 80°C |
| Net Weight: | ~ 1,26 g |
| Outer diameter (AD): | ~ 10 mm |
| Safety information: | This is not a toy. Inappropriate use might cause injury. |
| Special Information: | Raw magnets with hole(s) and countersink(s) are fragile unless they are not fixed safely. Please handle with care., Sold in even numbers only because these magnets can be used in pairs. |
| Tolerance: | ± 0.1 mm |
Similar Items
-
From 10 piece(s)0,82 €*
-
From 100 piece(s)0,76 €*-7.3 %